Floor Lamp Tab

Floor Lamp Tab

A floor lamp is a decorative lamp that has a shade and a tall stand.

Shade
Choose the shape of the lamp shade.
Base
Choose the shape of the lamp stand.
Colors
Click each button in the 'Colors' section to bring up a color picker dialog and change the indicated color for the lamp. The shade color will be the color of the lamp shade, and the base color will be the color of the stand. The 'Lamp Color' is the color of the light emitted by the lamp, not of any part of the lamp itself.
Heights
The physical height of the lamp is defined in the 'Heights' box. The 'Total' height is the height of the entire lamp from top to bottom. The 'Shade' height is the height from the top of the lamp to the bottom of the shade.
Diameters
The physical width of the lamp is defined in the 'Diameters' box. The 'Shade' diameter is the width of the widest part of the shade. The 'Base' diameter is the width of the widest part of the stand.

Common Settings

Length, Width, or Diameter sets the size of the light.
Settings, at the bottom of the dialog, are common to all types of light fixtures.
Intensity
The brightness of the lamp. Intensity can be specified in either Watts or Lumens. (A 100 watt incandescent lamp emits about 1700 lumens).
(IRender uses the conversion factor of 100 watts --> 1700 lumens for all lamps.)
Color
Click this button to bring up a color picker dialog and change the color of light emitted by the light fixture.
Component Placement Mode
Single - place just one light fixture and then stop
'Multiple - place the same light fixture repeatedly until you activate a different SketchUp tool.
Lighting Channel
Lights are normally placed in a default Channel - 3 for ceiling Lights or 2 for other lights.
Set the channel to a number from 1-7 to create a light and place it in a particular channel.
Create Lamp
Press Create Lamp when you are ready to begin create the lamp component.


See also

  • Floor Lamp Tab